Meiwha Multi-Purpose Coated Kraan
Produktfoardielen:
1. Premium hege snelheid stielen triedtappen mei nitriding coating, sterk ferbettere oerflak hurdens, slijtage en korrosjebestriding.
2. Spiraalfoarmige puntige tap, rappe nei ûnderen rjochte chipferwidering en glêde tapûnderfining foar trochgeande gatten, geweldich foar it snijen fan nije triedden of it reparearjen fan beskeadige triedden.
3. Skroefdraad tapboarset kin brûkt wurde mei hântapsleutels, boarpersen,tapmasines, CNC- en freesmasines, handich foar fluch en presys tappen.
4. Threading Tapping tool, folsleine gatboarring, tapjen ûntbramen en fersinkjen op ferskate materialen lykas aluminiumlegeringplaten, koperplaten, izer, algemien stiel en sa fierder.
Meiwha ISO spiraalkraan:
| Kat nr. | d1 | p(mm) | d2(mm) | SW | dk(mm) | l1(mm) | l2(mm) | l3(mm) |
| M2*0.40 | M2 | 0.4 | 3 | 2.5 | 1.6 | 40 | 6 | 15 |
| M2.5*0.45 | M2.5 | 0.45 | 3 | 2.5 | 2.05 | 44 | 6 | 16 |
| M3*0.50 | M3 | 0.5 | 4 | 3.2 | 2.5 | 46 | 6 | 19 |
| M4*0.70 | M4 | 0.7 | 5 | 4 | 3.3 | 52 | 8.4 | 20 |
| M5*0.80 | M5 | 0.8 | 5.5 | 4.5 | 4.2 | 60 | 9.6 | 24 |
| M6*1.00 | M6 | 1 | 6 | 5 | 5 | 62 | 12 | 29 |
| M7*1.00 | M7 | 1 | 6.2 | 5 | 6 | 65 | 12 | 33 |
| M8*1.25 | M8 | 1.25 | 6.2 | 5.5 | 6.8 | 70 | 15 | 37 |
| M10*1.50 | M10 | 1.5 | 7 | 5.5 | 8.5 | 75 | 18 | 41 |
| M12*1.75 | M12 | 1.75 | 8.5 | 6.5 | 10.2 | 82 | 21 | 48 |
| M14*2.00 | M14 | 2 | 10.5 | 8 | 12 | 88 | 26 | 48 |
| M16*2.00 | M16 | 2 | 12.5 | 10 | 14 | 95 | 26 | 52 |
| M18*2.50 | M18 | 2.5 | 14 | 11 | 15.5 | 100 | 30 | 55 |
| M20*2.50 | M20 | 2.5 | 15 | 12 | 17.5 | 105 | 32 | 58 |
Meiwha JIS spiraalkraan:
| D1 | P(mm) | d1(mm) | SW | L1(mm) | L2(mm) | L3(mm) | Nûmer fan fluit | TAP tolerânsje |
| M3 | 0.5 | 4.0 | 3.2 | 46 | 10.0 | 19 | 3 | 6H |
| M4 | 0.7 | 5.0 | 4.0 | 52 | 8.4 | 20 | 3 | 6H |
| M5 | 0.8 | 5.5 | 4.5 | 60 | 9.6 | 24 | 3 | 6H |
| M6 | 1.0 | 6.0 | 4.5 | 62 | 12.0 | 29 | 3 | 6H |
| M8 | 1.0 | 6.2 | 5.0 | 70 | 15.0 | 37 | 3 | 6HX |
| M8 | 1.25 | 6.2 | 5.0 | 70 | 15.0 | 37 | 3 | 6H |
| M10 | 1.0 | 7.0 | 5.5 | 75 | 18.0 | 41 | 3 | 6HX |
| M10 | 1.25 | 7.0 | 5.5 | 75 | 18.0 | 41 | 3 | 6HX |
| M10 | 1.5 | 7.0 | 5.5 | 75 | 18.0 | 41 | 3 | 6H |
| M12 | 1.25 | 8.5 | 6.5 | 82 | 18.0 | 48 | 3 | 6H |
| M12 | 1.5 | 8.5 | 6.5 | 82 | 18.0 | 48 | 3 | 6H |
| M12 | 1.75 | 8.5 | 6.5 | 82 | 18.0 | 48 | 3 | 6H |
| M14 | 1.5 | 10.5 | 8.0 | 88 | 20.0 | 48 | 3 | 6HX |
| M14 | 2.0 | 10.5 | 8.0 | 88 | 20.0 | 48 | 3 | 6HX |
| M16 | 1.5 | 12.5 | 10.0 | 95 | 20.0 | 52 | 3 | 6HX |
| M16 | 2.0 | 125 | 10.0 | 95 | 20.0 | 52 | 3 | 6HX |
| M18 | 1.5 | 14.0 | 11.0 | 100 | 25.0 | 55 | 4 | 6HX |
| M18 | 2.5 | 14.0 | 11.0 | 100 | 25.0 | 55 | 4 | 6HX |
| M20 | 1.5 | 15.0 | 12.0 | 105 | 25.0 | 58 | 4 | 6HX |
| M20 | 2.5 | 15.0 | 12.0 | 105 | 25.0 | 58 | 4 | 6HX |
| M24 | 3.0 | 19.0 | 15.0 | 120 | 30.0 | 66 | 4 | 6HX |
Meiwha DIN371 spiraalkraan:
| D1 | P(mm) | d1(mm) | SW | L1(mm) | L2(mm) | L3(mm) | Nûmer fan fluit | TAP tolerânsje |
| M3 | 0.5 | 3.5 | 2.7 | 56 | 10.0 | 18 | 3 | 6H |
| M4 | 0.7 | 4.5 | 3.4 | 63 | 8.4 | 21 | 3 | 6H |
| M5 | 0.8 | 6.0 | 4.9 | 70 | 9.6 | 25 | 3 | 6H |
| M6 | 1.0 | 6.0 | 4.9 | 80 | 12.0 | 30 | 3 | 6H |
| M8 | 1.0 | 8.0 | 6.2 | 90 | 15.0 | 35 | 3 | 6HX |
| M8 | 1.25 | 8.0 | 6.2 | 90 | 15.0 | 35 | 3 | 6H |
| M10 | 1.0 | 10.0 | 8.0 | 100 | 18.0 | 39 | 3 | 6HX |
| M10 | 1.25 | 10.0 | 8.0 | 100 | 18.0 | 39 | 3 | 6HX |
| M10 | 1.5 | 10.0 | 8.0 | 100 | 18.0 | 39 | 3 | 6H |
Meiwha DIN376 spiraalkraan:
| D1 | P(mm) | d1(mm) | SW | L1(mm) | L2(mm) | L3(mm) | Nûmer fan fluit | TAP tolerânsje |
| M12 | 1.25 | 9.0 | 7.0 | 110 | 18.0 | -- | 3 | 6H |
| M12 | 1.5 | 9.0 | 7.0 | 110 | 18.0 | -- | 3 | 6H |
| M12 | 1.75 | 9.0 | 7.0 | 110 | 18.0 | -- | 3 | 6H |
| M14 | 1.5 | 11.0 | 9.0 | 110 | 20.0 | -- | 3 | 6HX |
| M14 | 2.0 | 11.0 | 9.0 | 110 | 20.0 | -- | 3 | 6HX |
| M16 | 1.5 | 12.0 | 9.0 | 110 | 20.0 | -- | 3 | 6HX |
| M16 | 2.0 | 12.0 | 9.0 | 110 | 20.0 | -- | 3 | 6HX |
| M18 | 1.5 | 14.0 | 11.0 | 125 | 25.0 | -- | 4 | 6HX |
| M18 | 2.5 | 14.0 | 11.0 | 125 | 25.0 | -- | 4 | 6HX |
| M20 | 1.5 | 16.0 | 12.0 | 140 | 25.0 | -- | 4 | 6HX |
| M20 | 2.5 | 16.0 | 12.0 | 140 | 25.0 | -- | 4 | 6HX |
| M24 | 3.0 | 18.0 | 14.5 | 160 | 30.0 | -- | 4 | 6HX |
Meiwha JIS Rjochte fluit tap
| D1 | P(mm) | d1(mm) | SW | L1(mm) | L2(mm) | L3(mm) | Nûmer fan fluit | TAP tolerânsje |
| M6 | 1.0 | 6.0 | 4.5 | 62 | 16.0 | 29 | 4 | 6HX |
| M8 | 1.0 | 6.2 | 5.0 | 70 | 21.0 | 37 | 4 | 6HX |
| M8 | 1.25 | 6.2 | 5.0 | 70 | 21.0 | 37 | 4 | 6HX |
| M10 | 1.0 | 7.0 | 5.5 | 75 | 23.0 | 41 | 4 | 6HX |
| M10 | 1.25 | 7.0 | 5.5 | 75 | 23.0 | 41 | 4 | 6HX |
| M10 | 1.5 | 7.0 | 5.5 | 75 | 23.0 | 41 | 4 | 6HX |
| M12 | 1.25 | 8.5 | 6.5 | 82 | 24.0 | 48 | 4 | 6HX |
| M12 | 1.5 | 8.5 | 6.5 | 82 | 24.0 | 48 | 4 | 6HX |
| M12 | 1.75 | 8.5 | 6.5 | 82 | 24.0 | 48 | 4 | 6HX |
| M14 | 1.5 | 10.5 | 8.0 | 88 | 24.0 | 48 | 4 | 6HX |
| M14 | 2.0 | 10.5 | 8.0 | 88 | 24.0 | 48 | 4 | 6HX |
| M16 | 1.5 | 12.5 | 10.0 | 95 | 24.0 | 52 | 4 | 6HX |
| M16 | 2.0 | 12.5 | 10.0 | 95 | 24.0 | 52 | 4 | 6HX |
| M18 | 1.5 | 14.0 | 11.0 | 100 | 24.0 | 55 | 4 | 6HX |
| M18 | 2.5 | 14.0 | 11.0 | 100 | 24.0 | 55 | 4 | 6HX |
| M20 | 1.5 | 15.0 | 12.0 | 105 | 26.0 | 58 | 4 | 6HX |
| M20 | 2.5 | 15.0 | 12.0 | 105 | 26.0 | 58 | 4 | 6HX |
Meiwha DIN371 Rjochte fluittap
| D1 | P(mm) | d1(mm) | SW | L1(mm) | L2(mm) | L3(mm) | Nûmer fan fluit | TAP tolerânsje |
| M3 | 0.5 | 3.5 | 2.7 | 56 | 10.0 | 18 | 3 | 6HX |
| M4 | 0.7 | 4.5 | 3.4 | 63 | 13.0 | 21 | 3 | 6HX |
| M5 | 0.8 | 6.0 | 4.9 | 70 | 16.0 | 25 | 3 | 6HX |
| M6 | 1.0 | 6.0 | 4.9 | 80 | 18.0 | 30 | 4 | 6HX |
| M8 | 1.0 | 8.0 | 6.2 | 90 | 20.0 | 35 | 4 | 6HX |
| M8 | 1.25 | 8.0 | 6.2 | 90 | 20.0 | 35 | 4 | 6HX |
| M10 | 1.0 | 10.0 | 8.0 | 100 | 20.0 | 39 | 4 | 6HX |
| M10 | 1.25 | 10.0 | 8.0 | 100 | 20.0 | 39 | 4 | 6HX |
| M10 | 1.5 | 10.0 | 8.0 | 100 | 20.0 | 39 | 4 | 6HX |
Meiwha DIN376 Rjochte fluittap
| D1 | P(mm) | d1(mm) | SW | L1(mm) | L2(mm) | L3(mm) | Nûmer fan fluit | TAP tolerânsje |
| M3 | 0.5 | 3.5 | 2.7 | 56 | 10.0 | 18 | 3 | 6HX |
| M4 | 0.7 | 4.5 | 3.4 | 63 | 13.0 | 21 | 3 | 6HX |
| M5 | 0.8 | 6.0 | 4.9 | 70 | 16.0 | 25 | 3 | 6HX |
| M6 | 1.0 | 6.0 | 4.9 | 80 | 18.0 | 30 | 4 | 6HX |
| M8 | 1.0 | 8.0 | 6.2 | 90 | 20.0 | 35 | 4 | 6HX |
| M8 | 1.25 | 8.0 | 6.2 | 90 | 20.0 | 35 | 4 | 6HX |
| M10 | 1.0 | 10.0 | 8.0 | 100 | 20.0 | 39 | 4 | 6HX |
| M10 | 1.25 | 10.0 | 8.0 | 100 | 20.0 | 39 | 4 | 6HX |
| M10 | 1.5 | 10.0 | 8.0 | 100 | 20.0 | 39 | 4 | 6HX |
Skriuw jo berjocht hjir en stjoer it nei ús
